Visonic PowerMaster-10 G2 - Serial Number

MENUS AND FUNCTIONS
48 D-304829 PowerMaster-10/30 G2 User's Guide
B.16 Serial Number
The SERIAL NUMBER menu enables reading the system serial number and similar data for support purposes only.
♦ Here you can read the system serial number and other relevant data .

Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
1.
SERIAL NUMBER
Enter the [USER SETTINGS] menu, select the [ SERIAL NUMBER ]
option and press .
1
2.
090703000
Displays the control panel serial number.
3.
JS702271 I18.040
Displays the PowerMaster-10 G2 panel software version.
or
JS702275 I18.040
Displays the PowerMaster-30 G2 panel software version.
4.
JS700421 v1.0.02
Displays the control panel keypad software version.
2
5.
Panel ID: xxxxxx
Displays the control panel ID for PowerManage connectivity.
6.
PYTHON: 2.0.6
Displays the GSM image transfer software version.
2
7.
J-702xxx I18.040
Displays the PowerMaster-10 G2 panel default version.
or
J-702xxx K18.040
Displays the PowerMaster-30 G2 panel default version.
8.
JS702412 K01.022
Displays the control panel boot version.
9.
JS702415 K02.000
Displays the control panel Remote Software Upgrade downloader
version.
 ☺ Return to step 2
3, 4
Additional Information (section B.16)
1
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
2
Refers to PowerMaster-30 G2 only
3
To end this session and return to previous menu options, press the
button.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).