Visonic PowerMaster-10 G2 - 5.5.5 Configuring Sirens Functionality

MENUS AND FUNCTIONS
40 D-304829 PowerMaster-10/30 G2 User's Guide
disable report 


The display shows the currently selected option.
15.
or
Click the or button until the display reads the event group
you wish to be reported via MMS, for example, [alarm].
14
alarm
16.
When you are satisfied with the setting, press to confirm.
alarm 


A "Happy Tune"  ☺ sounds. The display confirms the set events to be
reported, and returns to step 14.
5, 15
 ☺ Return to step 14
C. To Program MMS and SMS Telephone Numbers
17.
Continue from step 4 in section A. “To Program Events to be Reported by
SMS via the server”
18.
1st SMS/MMS
Click the or button until the display reads the SMS/MMS
telephone number you wish to program or edit, for example, "2nd
SMS/MMS", and press .
or
2nd SMS/MMS
19.
Telephone num.
When the display reads [Telephone num.], press
20.


895283584
To program or edit the MMS/SMS number, at the blinking cursor position
enter the MMS/SMS telephone number, for example, “895283584”, using the
alphanumerical keypad.
6, 7
21.
When done, press to confirm.
895283584
A "Happy Tune"  ☺ sounds, the display confirms the MMS/SMS telephone
number and returns to step 19.
8, 15
 ☺ Return to step 19
Additional Information (section B.12)
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
This option allows you to program the events to be reported. To program telephone numbers, click the
or button until the display reads the desired option.
3
The display shows the currently selected option (indicated by a

symbol), for example, " disable report ".
Using the or buttons you can now select the events you wish to be reported to private
telephones numbers according to the options provided in the tables below:
PowerMaster-10 G2
Event Group Option Events to be reported
alarms+alerts Alarm and alert messages
alarms Alarm messages
alerts Alert messages
disable report No message will be reported
PowerMaster-30 G2
Event Group Option Events to be reported
disable report No message will be reported
all All messages
all (-op/cl) All messages, except arming & disarming
all (-alerts) All messages, except alerts
alarms Alarm messages only
alerts Alert messages only
op/cl Arming and disarming (Open/close) only
Note: “
all ” means all events including the L. BAT and AC FAIL trouble messages (PowerMaster-30 G2 only).