VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 61
FTP: Select to send the media files to a FTP server when a trigger is activated.
■ Server address: Enter the domain name or IP address of the FTP server.
■ Server port
By default, the FTP port server is set to 21. Also, it can be assigned with another port number between
1025 and 65535.
■ User name: Enter the login name of the FTP account.
■ Password: Enter the password of the FTP account.
■ Remote folder name
Enter a folder to place the media file. If the folder name does not exist, the Network Camera will create
one on the FTP server.
■ Passive Mode
Most firewalls do not accept new connections initiated from external requests. If the FTP server
supports passive mode, select this option to enable passive mode FTP and allow data transmission to
pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up
window as below. If it works, you will also receive a test.txt file on the FTP server.
Click Save to enable the settings.
To Next Page
Loading...
