VIVOTEK - A Leading Provider of Multimedia Communication Solutions
62 - User's Manual
HTTP: Select to send the media files to a HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name if necessary.
■ Password: Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up
window as below. If it works, you will also receive a test.txt file on the HTTP server.
Click Save to enable the settings.
Network storage: Select to send the media files to a network storage when a trigger is activated. Please
refer to Network Storage Setting on page 64 for details.
Click Save to enable the settings.
When completed, click Close to quit the page. The new server settings will automatically show up on the
Event Settings page as below.
To Next Page
Loading...
