Vivotek FD8136 - Page 140

VIVOTEK
140 - User's Manual
31
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5,100 100 4/4 Adjust saturation of image
according to mode settings.
100 means using the parameter
“saturationpercent”.
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
sharpness -3~3,100 100 4/4 Adjust sharpness of image
according to mode settings.
100 means using the parameter
“sharpnesspercent”
Saturationpercent 0 ~ 100 50 4/4 Adjust saturation of image by
percentage.
Less 0 <-> 100 More saturation
sharpnesspercent 0~100 50 4/4 Adjust sharpness of image by
percentage.
Softer 0 <-> 100 Sharper
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
7.11 image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Preview of brightness
adjustment of image
according to mode settings.
saturation -5~5,100 100 4/4 Preview of saturation
adjustment of image
according to mode settings.
100 means using the
parameter
“saturationpercent”
contrast -5 ~ 5 0 4/4 Preview of contrast
adjustment of image
according to mode settings.