Vivotek FD8136 User Manual

VIVOTEK
User's Manual - 31
Advanced Mode
Each function on the conguration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with
Advanced Mode
� If you want to set up advanced
functions, please click [Advanced Mode] on the bottom of the conguration list to quickly switch over.
The Navigation Area provides access to the Home page (the monitoring page for live viewing), Client
settings, Conguration page, and multi-language selection�
System > General settings
This section explains how to congure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System, and System
Time� When finished with the settings on this page, click Save at the bottom of the page to
enable the settings�
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page, and also on the view cell of ST7501 and VAST management software�
Turn off the LED indicators: If you do not want others to notice the network camera is in operation, you
can select this option to turn off the LED indicators�
Configuration List
Click to switch to Basic Mode
Firmware Version
Navigation Area

Vivotek FD8136 Specifications

General

Brand	Vivotek
Model	FD8136
Category	Security Camera
Language	English