VIVOTEK
User's Manual - 63
URL command -- http://<ip address>:<http port>/<access name for stream 1 or 2>
For example, when the Access name for stream 2 is set to video2�mjpg:
1. Launch Mozilla Firefox or Netscape.
2� Type the above URL command in the address bar� Press Enter�
3. The JPEG images will be displayed in your web browser.
NOTE
► Microsoft
®
Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http port>/<access name for stream 1 or 2> will fail to access the Network Camera�
► Users can only use URL commands to request the stream 5� For more information about URL
commands, please refer to page 113�
RTSP Streaming
To utilize RTSP streaming authentication, make sure that you have set a password for the Network
Camera rst; please refer to Security > User account on page 70 for details�
http://192.168.5.151/video2.mjpg
NOTE:
To Next Page
Loading...
Need help?
General
