Vivotek FD8162 - Page 134

VIVOTEK
134 - User's Manual
wdrc_strength 0~2 4/4 WDR enhanced.
0: low
1: medium
2: high
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for each
channel which might be for different scene of light (daytime or nighttime).
Group: videoin_c0_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable/disable this profile setting
policy day,
night,
schedule
4/4 The mode which the profile is applied to.
begintime hh:mm 4/4 Begin time of schedule mode.
endtime hh:mm 4/4 End time of schedule mode.
exposuremode auto,fixed 4/4 Exposure Mode
minexposure 1~32000 4/4 Minimum exposure time.
maxexposure 1~32000 4/4 Maximum exposure time.
enableblc <boolean> 4/4 Enable backlight compensation.
exposurelevel 0~12 4/4 Exposure level
agc 0,1,2 4/4 Set auto gain control to normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in FD8162)
agcmode auto,fixed 4/4 Set auto gain control mode.
maxgain 0~100 4/4 Manual set maximum gain value.
mingain 0~100 4/4 Manual set minimum gain value.
autoiris <boolean> 4/4 Enable auto Iris.
(not used in FD8162)
enablewdr <boolean> 4/4 Enable/disable wield dynamic range. (not used in
FD8162)
whitebalance auto, manual 4/4 “auto” indicates auto white balance.
“manual” indicates keep current value.
rgain 0~100 4/4 Manual set rgain value of gain control setting.