VIVOTEK - Built with Reliability
170 - User's Manual
A camera can be inserted into multiple view cells. This way, a camera with a wide eld of view, ,
can simultaneously display dierent regions of interest on dierent view cells.
IMPORTANT:
If the current layout already contain the max. number of cameras, e.g., 16 for the ND9441, the
following message will prompt.
If you are using the 16-CH ND9441, there can be more than 16 view cells across multiple layout
pages, e.g., on the second page of the 1M+12 layout. Placing a camera in the 17th to 18th view
cells will bring out the following message.
A view cell attempting to connect to a network camera will look like this. If the connection
attempt takes a long time, it may result from network problems or incorrect conguration with
video streaming. For example, you may have congured the camera to be streaming a 5MP
stream. The NVR uses video stream #1 for recording, and stream #2 from cameras for live
viewing. You should then open an individual web console to the network camera to change its
video streaming conguration.
To Next Page
Loading...
