92 Ring Down/Hot Line/Off-Hook Preference
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button (SPEAKER button on IP Phone),
-or-
Lift the handset, the line will be seized and number is dialed. If you
receive a busy/no answer, you may repeat the step to activate
another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation
tone will sound and the Auto Redial function is cancelled.
SINGLE LINE TELEPHONE
Not applicable
Ring Down/Hot Line/Off-Hook
Preference
If your phone has been programmed for Off-Hook Preference, you can
access an outside line or a system feature by going
off-hook or pressing the ON/OFF button (SPEAKER button on IP Phone).
It simulates the depression of a specific button and can be programed
by a station user or a database administration programmer using code
[691] + the button number.
To Next Page
Loading...
