40 Call Pickup
To create a PARKED CALL PICKUP button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [#] + the desired parking location (424-437=XTS,
430-437=XTSc).
SINGLE LINE TELEPHONE
To park a call:
1. Press the FLASH button. The caller is put on Exclusive Hold.
2. Dial parking location (424-437=XTS, 430-437=XTSc). A confirmation
tone will sound.
3. If busy, press the FLASH button twice and dial another park
location.
To retrieve a parked call:
1. Lift the handset and press the [#] button.
2. Dial parking location (424 to 437) where call was parked.
Call Pickup
A station can pickup a call ringing to any specific unattended station by
using the Directed Call Pickup procedure.
A station can pickup a call ringing to an unattended station within the
same ACD/UCD group by using the Group Call Pickup procedure.
Directed Call Pickup
To create a Pickup Button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button, then dial #0.