Loop Key 73
CO Line Queue Cancel
To cancel a Call Back Request:
1. Dial the CO Line Queue Cancel code [626] on the dial pad.
2. Replace the handset, or press the ON/OFF button (SPEAKER button
on IP Phone).
Loop Key
A station not having a direct appearance for a CO line will receive
incoming CO calls and transferred CO calls under the LOOP button. Only
one call at a time can be connected to a keyset on the LOOP button.
To make a Loop button:
1. Press the SPEED button twice.
2. Press the desired flexible button.
3. Dial [89], then press HOLD.
-or-
Dial [8889], then press HOLD, if using the Alt Dialing Plan.
Mailbox Buttons
To program a station’s mailbox on a flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial the mailbox feature access code (460-467 = voice mail location
1-8; 468 = remote voice mail location).
4. Dial the VMID number. A confirmation tone will sound. If an error is
made during entry, an error tone will sound.
Example … The numbers 4606037 represents a voice mail button
(group 1) for VMID 6037 that is in the system with the centralized
voice mail installed.
To Next Page
Loading...
