Call Pickup 41
To use Directed Call Pickup:
1. Dial the station number of the known ringing telephone. Receive
ringback tone or call announce tone depending on the intercom
selector switch setting.
2. Press the preprogrammed PICKUP button to answer the call.
SINGLE LINE TELEPHONE
To use Directed Call Pickup:
1. Lift the handset.
2. Dial [#1].
3. Dial station number of ringing telephone.
Group Call Pickup
To create a Pickup Button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial #0.
To use Group Call Pickup:
1. Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone).
2. Dial [#0] on the dial pad,
-or-
Press preprogrammed PICKUP button to answer call.
You MUST have access to the specific outside line or a
LOOP button to do a directed call pickup.
To Next Page
