Alternate Dial Plan 17
Alternate Dial Plan
When you use an MPBE, the 3-digit default dial plan uses station
numbering of 100-419 (320 stations) and feature code numbering
beginning with feature code 420 as shown in the
“Default Numbering
Plan” on page 112
. When your system has more than 320 stations,
default station numbering would cause conflicts with default feature
code numbering. For example, physical station number 321 would be
station 420 in the default numbering plan, and this conflicts with VM
Msg Set default feature code of 420.
The Alternate Dial Plan programming feature is used when your system
has more than 320 stations (using an MPBE). The default Alternate Dial
Plan uses station numbering of 100-591 (492 stations) and feature code
numbering that uses the 3-digit default dial plan with a leading digit of
8, resulting in a 4-digit feature code plan. For example, the VM Msg Set
default feature code of 420 becomes 8420. Feature code numbering
under the default Alternate Dial Plan is as described above with the
following exceptions:
6540 (Answering Machine Emulation w/ringing) is changed
to 8665
6541 (Answering Machine Emulation w/speaker) is changed
to 8666
88 (CO Line Direct Access) is changed to 8888
89 (Loop Key) is changed to 8889
The Alternate Dial Plan does not apply to MPB1 or MPB2 systems.
To Next Page
Loading...
