Station User Guide xv
Features Description
CONF Used to establish conference calls.
DND Used to prevent calls from ringing at your station when on a
call or busy. Also can be used to activate a Page Block feature.
FLASH Used to end an outside call and to restore dial tone without
hanging up the receiver.
FWD Use to send unanswered calls to another station, Hunt group,
or voice mailbox.
HOLD Used to hold calls and to retrieve held calls.
ICM Not used at this time.
MSG / CALLBK Used for Auto-CallBack to a phone that has left a text message
or to access voice messages.
MUTE Used to activate/deactivate MUTE function. When activated,
the party on the other end cannot hear you.
PGM Used as a rotary to select mode of operation: Handsfree (LED
not lit), Tone (LED lit solid), or Privacy(LED blinking).
REDIAL Used to access and dial the last number dialed.
SAVE Not used at this time.
SPEED Used to access speed dialing, save number redial, and last
number redial. Button is also used to access flexible button
programming.
SPEAKER Used to make a call without lifting the handset. Serves as an
ON/OFF button.
TRANS Used to transfer intercom or outside call from one station to
another.
VOLUME Used to adjust level of tones, ringing, and receiver volume.
24 Flexible
Buttons
Used to access outside lines or call-handling features.
To Next Page
