32 Call Coverage
2. Then press the flashing COVERAGE flexible button,
-or-
Press the ON/OFF button (SPEAKER button on IP Phone).
The call is answered and will cease to ring at any other stations that
may have the same coverage appearance.
After the call is answered, one of the following messages will
display:
Non-network system or in same Node:
Network system with call passed across a switch:
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need not
be physically installed, only the SLT card must be installed.
CALL FOR STA XXXX
FROM STA YYYY HH:MM:SS
XXXXXXXXX CALLING
YYYYYY HH:MM:SS
To Next Page
Loading...
