80 Off-Hook Voice Over (OHVO)
To respond to an Off-hook Voice Over:
After receiving an OHVO announcement, select from the following
three options to respond to the caller:
Option 1 -- This method lets the receiving station respond to
an OHVO announcement utilizing the MUTE feature button.
This button is pressed to carry on a two-way conversation with
the OHVO initiator while still listening to the original call.
Option 2 -- The OHVO receiving station may respond to the
calling station by using the Silent Text Messaging (this feature is
only available to digital key telephones, and the calling station
must be a digital display telephone).The OHVO receiving
station may press a preprogrammed Message button to
respond to the voice over announcement without being
released from the current call (e.g., by pressing a flexible button
preprogrammed for the message IN MEETING, the calling
station receives this message on the LCD display).
Option 3 -- The OHVO receiving station may respond to the
calling OHVO station by using the Camp On feature. The OHVO
receiving station presses the flashing HOLD button to consult
with the calling station. The existing call (CO line) goes on
Exclusive Hold automatically. This method then follows Camp
On procedures and operation.
SINGLE LINE TELEPHONE
Not applicable
IP Phones do not support the OHVO function.
To Next Page
Loading...
