12
5.0 Turning on the Livedrive V2
When powering up the Livedrive V2 an initialization screen will be displayed
on the LCD screen.
The device will take a few seconds to boot up during the initialization process,
where all of the LEDs on the front panel will light up.
Once the initialization process has finished, the LCD screen will displaythe
main screen.
NOTE: when powering up the device after the first time and/or presets have been
made/saved, the main screen will display the name of the last used preset.
The Livedrive V2 is now ready for operation.
Livedrive V2
DEFAULT PRESET
Livedrive V2
XXXXXXXXXXXXXXXXXX
To Next Page
Loading...