20
Introduction
Dear customer,
Thank you for making the excellent decision to purchase this Voltcraft® product.
You acquired a high-quality product with a name that stands for outstanding products in the field of mea-
suring, charging and power technology, which excel by professional competence and permanent inno-
vation.
The products of the Voltcraft® family offer optimum solutions even for the most demanding applications
for ambitious hobby electricians as well as for professional users. Voltcraft® offers reliable technology
with an exceptional cost-performance ration.
Therefore, we are absolutely sure: starting to use Voltcraft will also be the beginning of a long, suc-
cessful relationship.
We hope you will enjoy using your new Voltcraft® product!
Intended use
- Measuring and displaying electric parameters in the range of excess voltage category III up to max.
600V against ground potential, pursuant to EN 61010-1 or lower.
- Alternate and direct current measuring up to max. 500 V
- Measurement of direct and alternating voltage up to 5 A
- Measuring resistance values of up to 20 MΩ
- Diode test
May only be operated with batteries.
The measuring instrument must not be operated when it is open, i.e. with an open battery compartment
or when the battery compartment cover is missing. Measuring in damp rooms or under unfavourable
ambient conditions is not admissible.
Unfavourable ambient conditions are:
- Wetness or high air humidity
- Dust and flammable gases, vapours or solvent,
- Thunderstorms or similar conditions such as strong electrostatic fields etc.
Any use other than the one described above damages the product. Moreover, this involves dangers such
as e.g. short circuit, fire, electric shock, etc. No part of the product must be modified or rebuilt!
The safety instructions must be observed at all times.
To Next Page
Loading...
Need help?
General
