Volvo A30G - Operating Up- or Downhill

Dump support
Dump support shows the load unit's sideways angle (inclination)
and is a help when dumping, for example.
The value for sideways angle (inclination) (%) is shown in
operating display 2.
The direction of the inclination is shown by three different symbols
for inclination. The symbol changes depending on the machine's
sideways angle in relation to the preset alarm value.
For more information the load unit's sideways angle (inclination),
see page
53 .
The machine generates an alarm when the load unit's angle
reaches a preset value and the body is up. Raising of the load
body can be prevented in connection with this if preset.
The preset alarm level is 4% but should be adapted to existing
conditions.
For setting the alarm value, contact a qualified workshop.
Animation of Dump support
The load unit's sideways angle is shown as an animation on the
information display when the angle exceeds 33% of the alarm
value, the body is up, or reverse gear is selected.
Raising
- 34–67% of alarm value, white symbol
- 68–100% of alarm value, yellow symbol
Lowering
- 30–63% of alarm value, white symbol
- 64–100% of alarm value, yellow symbol
The load unit's angle can be calibrated with the authorized service
tool.
14:59
1
V1201230
1 Angle indicator (inclination), sideways

V1166703
Symbols for angle (inclination)

14:59
V1201231
1
1 Symbol for angle (inclination)


254
Operating techniques
Operating up- or downhill