Foreword
This Operator's Manual is intended to be a guide to correct use and
maintenance of the machine. Therefore, study it carefully before starting
and operating the machine, or before performing any preventive
maintenance. Keep the manual in the cab so that it is always available for
easy reference. If the Operator's Manual is lost, replace it immediately.
The manual describes the primary applications for which the machine is
intended and is written to apply for all markets. Disregard the sections that
are not relevant for this machine or for the applications for which this
machine will not be used.
NOTE!
If this Operator's Manual covers more than one machine, the information
applies to all machines unless otherwise indicated.
A lot of work has been spent on the machine's design and manufacture to
make it as effective and safe as possible. Accidents that occur in despite of
this can most often be contributed to the human factor. A safety-conscious
person and a well-maintained machine make a safe, efficient, and
profitable combination. Therefore, read the safety instructions and follow
them.
We continuously strive to improve our products and to make them more
effective by changes to their design. We reserve the right to do this without
committing ourselves to introduce these improvements on already
delivered products. We also reserve the right to change data and
equipment, as well as instructions for service and maintenance without
prior notice.
Safety regulations
It is the operator's obligation to know and follow the applicable national and
local safety regulations. The safety instructions in this manual only apply to
cases where there are no national or local regulations.
DANGER
The safety symbol combined with this signal word indicates a hazardous
situation which, if not avoided,
will result in death or serious injury.
Danger
is limited to the most extreme situations.
WARNING
The safety symbol combined with this signal word indicates a hazardous
situation which, if not avoided, could result in
death or serious injury
.
CAUTION
The safety symbol combined with this signal word indicates a hazardous
situation which, if not avoided, could result in
moderate or minor injury
.
NOTICE
Indicates a potentially hazardous situation which may result in machine
damage.
NOTE!
It is used to highlight information for installing, use, or maintenance that is
important but is not safety-related.
OPERATOR'S MANUAL
Table of contents
Instrument panels
Other controls
Operating instructions
Operating techniques
Safety when servicing
Maintenance
Specifications
Alphabetical index
A25G/A30G
PUB 20050173-N
The original language is English.Original instructions.
2023.12
Copyright © 2023, Volvo Construction Equipment. All rights reserved.