Maintenance service, every 2000
hours
Lubrication, every 2000 hours
Grease points every 2000 hours
Grease points (for item 1 and 4, same grease points on both right and left side of the machine)
Pos. Grease point
1 Underbody skid plate, hinge
2 Battery cover, hinges
3 Door, hinges
4 Spill guard, hinge
Secondary steering, checking function
NOTE!
The function test is only performed on an unloaded machine.
NOTE!
The pressure in the brake system should be at the maximum level
before the test starts.
NOTE!
Keep in mind that manoeuvrability is limited when the engine is
off.
1 Stand the machine on a downhill slope with the front facing
down the hill in a separate location with plenty of space.
2 Hold the foot on the brake and move the gear selector to
neutral position.
3 Turn off the engine by pressing in the emergency stop.
4 Release the brake pedal and let the machine roll forward at a
speed of approx. 5 km/h (3.1 mph). Then it should be possible
to steer the machine from turned machine back to straight
ahead.
5 When the machine has stopped rolling, engage the parking
brake.
6 Turn the ignition to position 0.
7 Pull out the emergency stop.
346
Maintenance
Maintenance service, every 2000 hours
To Next Page
Loading...
