Instrument control unit I-ECU, description
Regarding: L60F, L70F, L90F
0
rpm
V1048600
Fig.4 Instrument control unit with information dis‐
play
V1047258
Fig.5 Keypad for information display
The instrument control unit is integrated with the main instrument
and receives information from the data bus. The information is
processed and shown on gauges, control lights, warning lights
and information display.
Functions
• Values for gear position, operating hours as well as status val‐
ues for parking brake and warning messages are processed
and result in a number of figures on the information panel.
• Special warnings, e.g., central warnings, low engine oil pres‐
sure are detected and the corresponding warning lights are
activated.
• Values for transmission oil temperature, coolant temperature
engine and fuel level are shown on gauges.
• Setting of display alternatives and parameter alternatives for
information panel.
• Storage and display of operating hours.
• PIN-code for theft protection via keypad
14
To Next Page
Loading...
