Information display, check
Regarding: L60F, L70F, L90F
Read-out of information from the figure “Check”
Check
In the figure “Check”, information is shown about which systems
or functions to check/troubleshoot. The information is presented
with symbol and explaining text.
To return to previous figure, press [ESC].
For more information, press SELECT, which gives a new figure
“Detail info”.
Detail info
The following information is shown under Detail info:
- Active: indicates if the malfunction/error is active or inactive
- Code: shows any error code in the form of component desig‐
nation followed by FMI (failure/error cause). If the problem
cannot be associated to a component designation, the error
code is shown instead according to SAE-standard (e.g.,
MID128 PID123 FMI12).
- Source: shows which control unit detected the error/failure
- First event: logged date for first time that the failure/error
occurred
- Number of events: number of times that the failure/error has
been detected
- Last event: last date for failure/error detection
Check
Technical failure engine
close:
ESC
info:
Detail info
– – Check – –
Active: Yes
Code: SE2501 – 07
Source: VECU
First event: 20060817
Number of events: 12
Last event: 20060829
Example – Check Technical failure engine
56
To Next Page
Loading...
