Keypad
The following can be performed with the keypad:
- Select group
- Scroll within group
- Activate/deactivate functions
- Reset and acknowledge
- Setup (settings)
The keys' function are also described in the following table.
Certain keys also correspond to a digit which is shown on the
key's lower right corner. The number values are used, e.g., when
setting date and entering PIN-code for theft protection.
The key SELECT
is used to, e.g., make selections,
acknowledge, and to get detailed information about any malfunc‐
tions.
The key
ESC
is used to return or cancel.
ESC
Return Engine 1 Transmission 2 Hydraulic system 3
Scroll up Axles 4 Electrical system 5 Vehicle information 6
SETUP
Scroll down Vehicle messages 7 Service 8 Setup (settings) 9
SELECT
Confirm 0
V1047258
Fig.15 Keypad
39
To Next Page
Loading...
