Volvo XC90 - Selecting Ignition Mode

STARTING AND DRIVING
427
Level Functions
II
•
The headlamps come on.
•
Warning/indicator lamps illuminate
for 5 seconds.
•
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the car has
been started.
This ignition position consumes a
lot of current from the battery and
should therefore be avoided!
A
Also activated when the door is opened.
Related information
•
Starting the car (p. 424)
•
Adjusting the steering wheel (p. 198)
•
Using jump starting with another battery
(p. 474)
•
Selecting ignition mode (p. 427)
Selecting ignition mode
The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
Selecting ignition position
Start knob in the tunnel console.
•
Ignition position 0 - Unlock the car and
store the remote control key inside the car.
NOTE
To reach level I or II without starting the
engine - do not depress the brake pedal, or
the clutch pedal for cars with manual gear
changing, when these ignition positions are to
be selected.
•
Ignition position I - Turn the start knob
clockwise and release it. The control auto-
matically returns to its starting position.
•
Ignition position II - Turn the start knob
clockwise and hold it in position for
approx. 5 seconds. Then release the knob,
which automatically returns to its starting
position.
•
Back to ignition position 0 - To return to
ignition position 0 from position I and II -
Turn the start knob clockwise and release.
The control automatically returns to its star-
ting position.
Related information
•
Starting the car (p. 424)
•
Switching off the car (p. 425)
•
Ignition positions (p. 426)
•
Adjusting the steering wheel (p. 198)
•
Using jump starting with another battery
(p. 474)