25
3.4 Cleaning with the Kobold
2-in-1 nozzle
The Kobold 2-in-1 nozzle is extremely versatile. It has
two bristle settings that can be used for different tasks.
NOTICE
Risk of damage from improper use!
• Do not use the Kobold 2-in-1 nozzle attachment on
smooth or polished surfaces.
1. P
lace
the attachment socket of the Kobold 2-in-1
nozzle
onto the Kobold VB100 Cordless Vacuum
Cleaner.
2. For fine dust or delicate objects, increase the length
of the bristles. This is done by pressing the green
button
and sliding the brush attachment out-
wards until the green button engages.
3. For ground-in dirt, remove the brush attachment.
This is done by holding down the green button
and pulling off the brush attachment.
4. To remove the Kobold 2-in-1 nozzle, press the
button on the suction piece of the Kobold VB100
Cordless Vacuum Cleaner and pull the whole nozzle
forwards.
2
2
To Next Page
Loading...
Need help?
General
