32
5.2.2 Cleaning and/or replacing the motor
protection lter on the Kobold VB100
Cordless Vacuum Cleaner
The motor protection filter serves to protect your
cordless vacuum cleaner
from contaminants. To ensure
the long service life of your cordless vacuum cleaner,
it is important to carry out visual checks and regular
maintenance on the motor protection filter.
The motor protection filter can be cleaned as many
times as necessary. It must only be replaced if the
premium filter bag has been damaged or if the motor
protection filter is extremely dirty or gummed up.
NOTICE
Risk of damage from improper use!
• Use the Kobold VB100 Cordless Vacuum Cleaner
only with the motor protection filter inserted.
Removing and inserting the motor protection
lter
The motor protection filter
is held in place by two
guide slots
on the filter cover.
1. Hold both sides of the motor protection filter
and
carefully lift it upwards and out of its guide slots.
2. To put it back in, slide the new or cleaned motor
protection filter back into the guide slots. The green
plastic grid should be pointing towards the premi-
um filter bag.
To Next Page
Loading...
Need help?
General
