24
3.3.3 Switching between ex/ne
The ‘flex’ and ‘fine’ setting options on the underside of
the Kobold EBB100 Electric Brush can be used to adjust
the device in line with the cleaning requirements.
On delivery, the electric brush will be switched to
the ‘flex’ setting to provide protection during
transportation. Read the instructions below on how to
switch your electric brush to ‘fine’ for everyday use.
Fine setting Use your electric brush on the ‘ne’ setting for everyday vacuuming.
Flex setting If you are vacuuming coarse dirt, it is advisable to switch the electric brush to
the ‘ex’ setting.
CAUTION
Risk of injury due to the rotating brush!
• Always disconnect the Kobold EBB100 Electric
Brush from the Kobold VB100 Cordless Vacuum
Cleaner before changing the setting on the under-
side of the Kobold EBB100 Electric Brush.
You can change between the settings as follows:
1. Switch the cordless vacuum cleaner off at the main
switch.
2. Push the slider
on the underside of the electric
brush to position
(fine) for removing fine dust
from crevices or for deep-cleaning carpets, or to
position
(flex) for picking up coarse material.
You will feel the slider locking into place and the
front sealing lip extends outwards.
3
1
To Next Page
Loading...
Need help?
General
