Noise reduction settings
降噪设置
Noise reduction reduces the unwanted noise that might be heard between
notes. This setting is made independently for each program.
HINT: High-gain amp models are particularly prone to noise, so we
recommend using noise reduction in this case.
降噪可以减少音符之间听到的不需要的噪音。该设置会针对每个音色独立设置。
提示：高增益放大器模型尤其容易产生噪音，因此我们建议针对这种情况使用降
噪。
1. Hold down the CABINET on/off switch for about one second to enter OPTION
parameter setting mode.
The CABINET on/off switch LED will blink.
1、按住 CABINET 开关大约一秒钟进入 OPTION 参数设置模式。
CABINET 开关的 LED 指示灯会闪烁。
2. Turn the MIDDLE control to adjust the noise reduction sensitivity.
To Next Page
Loading...
