Windows：微软 Windows XP SP3/Windows Vista SP1 或者更高版本
PU）
settings
恢复出厂设置
cancel this procedure, press the EXIT/TUNE switch.
Never turn the power off while initialization is being performed.
EXP PARAM 屏幕的同时，打开电源。
4、点击 WRITE 开关。
注意：禁止在初始化过程执行时强行关闭电源。
Mac：苹果 OS X 10.4 或更高版本（Power PC G4 或更高/Intel C
Restoring the factory
Here’s how to restore the ToneLab ST to its factory-set state.
NOTE: This operation will initialize the programs you’ve
saved, returning all of them to the factory-set programs.
这里介绍如果把 ToneLab ST 恢复到出厂默认状态。
注意：该操作将会对你已经保存的编程音色进行初始化，把它们全部恢复到出厂
时的编程音色。
1. Turn the power off.
2. While holding down the EXIT/TUNE switch and EXP PARAM screen, turn the
power on.
3. When the UP/DOWN pedal LEDs blink, release the switches.
HINT: If you decide to
4. Press the WRITE switch.
Initialization will be completed, the program display will indicate “0”
NOTE:
1、关闭电源。
2、按住 EXIT/TUNE 开关和
3、当上/下踏板的 LED 指示灯闪烁时，释放开关。
提示：如果你决定放弃该操作，点击 EXIT/TUNE 开关。
To Next Page
Loading...
Need help?
General
