Trying out the programs
体验编程音色
The ToneLab ST has a total of one hundred programs, consisting of
rewritable user programs (No.0–49) and preset programs (No.50–99).
For details on the preset programs, refer to “Preset program list”
(p.31).
ToneLab ST 总共拥有一百种编程音色，由可擦写的用户音色（序号 0-49）和预
设音色（序号 50-99）组成。如果需要了解更多关于预设音色的内容，请参阅“预
设编程音色清单”部分。
1. Press the UP or DOWN pedal to switch programs.
Play your guitar, and try out the various programs. Each program contains
settings that assign the expression pedal to control wah, volume, delay
feedback, reverb input level, or some other effect parameter. Operate the
expression pedal to try out the assignment for each program.
HINT: To increment the program number by 10, hold down the UP pedal and
press the EXIT/TUNE key. Similar, to decrement the program number by 10,
hold down the DOWN pedal and press the EXIT/TUNE key.
1、点击上或下踏板切换音色。
演奏你的吉它，尝试不同的音色。每种编程音色提供了可分配的表情踏板的设置，
可以用来控制哇声，音量，延迟反馈声，混响输入电平，还有一些其他的效果参
数。操纵表情踏板可以尝试为每种音色分配效果。
提示：如果要按照 10 为步进增加编程序号，按住上踏板，同时点击退出/调音按
键[EXIT/TUNE]。同样的，如果要按照 10 为步进减少编程序号，按住下踏板的同
时点击退出/调音按键。
Creating your own sounds
创造你自己的声音
To Next Page
Loading...
Need help?
General
