·请确认你的耳机或者连接的线缆
·表情踏板是否被分配为增益或者
没有问题。
音量，而且完全朝向你自己？
·你是否激活了处于静音状态的调音器？
. Could the effect setting be off?
e the selector to select the effect that you want to use, or
Press the
nimum value?
果器，或者使用效果器开关打开效果器。
果调音器被激活，那么效果器就处于旁路状态。点击退出/调音开关[EXIT/TUNE]
消旁路。
EDIT]是否被设置到最小值?
e, and adjust the parameters to appropriate values.
s” (p.8).
模式，调节参
数值。
器/线路开关[AMP/LINE]是否设置正确？
，正确的设置放大器/线路开关[AMP/LINE]。
witches, selectors, or
Effects don’t apply
Us
use the effect on/off switch to turn the effect on.
• Could the tuner be active?
The effects are bypassed if the tuner is active.
EXIT/TUNE switch to defeat bypass.
• Could an EDIT knob be set to the mi
Adjust the EDIT knob.
效果器没有反应
·效果器是否被关闭？
使用选择器选择你想要使用的效
·调音器是否被激活？
如
取
·编辑旋钮[
调节编辑旋钮[EDIT]。
Something is wrong with the sound
. Are the OPTION parameters set appropriately?
Hold down the CABINET on/off switch about one second to enter OPTION
parameter setting mod
. Is the AMP/LINE switch set appropriately for the output destination
that’s connected?
Set the AMP/LINE switch correctly as described in step 1 of “Making
connection
声音出现故障
·选项[OPTION]参数是否设置正确？
按住音箱开关[CABINET]大约一秒钟，进入选项[OPTION]参数设置
数到合适的
·检查相连接的输出标的，看放大
按照“线缆连接”中介绍的第一步
The sound does not change when you operate the s
knobs on the top panel
当你操作顶部面板的开关，选择器，或者旋钮时，声音并没有改变。
To Next Page
Loading...
Need help?
General
