EasyManuals Logo

VST VRP-150 User Manual

VST VRP-150
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REVOLUTION WATER
HEATER
Installation
Manual
Keep this manual near the water heater for future reference
whenever maintance or service is required.
* The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight.
* Lead Free
- The installation must conform with local codes or, in
the absence of local codes, the National Fuel Gas Code,
ANSI Z223.1/NFPA 54 and/or CSA B149.1, Natural Gas
and Propane Installation Code.
- When applicable, the installation must conform with
the Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280 and/or CAN/CSA Z240
MH Series, Mobile Homes.
Model
VRP-150 VRP-199
VRS-150 VRS-199
WARNING: If the information in these
instructions is not followed exactly, a fire or
explosion may result causing property damage,
personal injury, or death.
- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire
department.
- Installation and service must be performed by a
qualified installer, service agency or the gas supplier.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VST VRP-150 and is the answer not in the manual?

VST VRP-150 Specifications

General IconGeneral
BrandVST
ModelVRP-150
CategoryWater Heater
LanguageEnglish