8
Installation Manual
Rating Plate
Danger
The gas type and electricity voltage must match the rating plate. Using a different gas type and electricity voltage will cause the water heater to
malfunction.
Before the installation, check the rating plate located on the side of the water heater to ensure that the water heater matches the gas type, gas
pressure, water pressure, and electrical supply available in the installation location. If the water heater does not match each of these ratings, do
not install the water heater. If the gas conversion is required, the included gas conversion kit must be used.
[Indoor rating plate][Outdoor rating plate]
* When installing the outdoor model, attach the rating plate in the outdoor kit over the red marking.
To Next Page
Loading...