VTech 6042 - Ring Volume; Battery Low Tone

www.vtechphones.com
9
Basic operation
Telephone settings
The handset will
not ring when the
ringer volume is at
the lowest setting.
A ringer off icon
will be displayed.
While the
telephone is
ringing, you
can temporarily
silence the ringer
by pressing
OFF/CLEAR or
MUTE/REMOVE.
The next call will
ring normally. A
ringer off icon
will be displayed.
•
•
Battery low tone
The handset is preset to beep when the battery level is low.
• Press MENU/SELECT to display the menu when in idle mode.
• Press or to reachto reach SETUP HS. Press MENU/SELECT.
• Press or to reachto reach TONES. Press MENU/SELECT.
• Press or to reachto reach BATTERY LOW. Press MENU/SELECT.
• A checkmark is shown next to the current selection. Press or
to choose ON or OFF.
• Press MENU/SELECT.
• The screen displays STORED and you’ll hear a conrmation beep.
BAtterY low
out of rANGe
oN
off
Ring volume
The handset ringer volume can be adjusted, there are ve levels to
choose from.
• Press MENU/SELECT to display menu when in idle mode.
• Press or to reach SETUP HS. Press MENU/SELECT.
• Press or to reach RING VOLUME. Press MENU/SELECT.
• Press or to scroll through the choices and a sample of each ring
volume will be played.
• Press MENU/SELECT to conrm selection. The screen displays
STORED and you’ll hear a conrmation beep.
You can adjust the ringer volume by pressing VOL
+
/VOL
-
on the
telephone base when the telephone is ringing.
toNeS
HANdSet NAMe
Telephone settings
The volume of
the telephone
base ringer is set
separately from
the handset ringer.
See page 29 for
telephone base
ringer volume
settings.
•