VTech 6042 User Manual

www.vtechphones.com
16
Basic operation
If the destination
handset does not
answer, press
OFF/CLEAR on
the originating
handset to return
to the external
call.
Press and hold
FIND HANDSET
to page handsets
while listening to
messages.
•
•
Transfer an external call
An external call can be forwarded to another handset during a conversation.
• Press INT and put the call on hold on the originating handset.
• Use the keypad to select the destination handset and the screen displays
CALLING HANDSET X. (For 6052/6053 only)
• The destination handset rings and its screen displays
CALLING FROM: HANDSET X.
• After the destination handset is answered, press MENU/SELECT and
then press or to reach CONFERENCE.
• Press MENU/SELECT to let the destination handset join the
conversation.
• Press MENU/SELECT and the screen displays END CONFERENCE and
then press MENU/SELECT to return to the intercom conversation.
• During the intercom conversation, press MENU/SELECT and use or
to reach OTHER CALL to return to the external call and put the intercom on
hold. Repeat this step to switch between the external and intercom call.
• Press OFF/CLEAR on the originating handset to forward the external call
to the destination handset.
eNd coNfereNce
coNfereNce
otHer cAll
otHer cAll
coNfereNce
Find handset
• Press FIND HANDSET on the telephone base to locate the handset when
in idle mode. All handsets will ring and PAGING will ash on the screen
of all handsets.
• Press FIND HANDSET again or put the handsets back on the telephone
base or charger to stop the paging tone.
PAGING

VTech 6042 Specifications

General

Brand	VTech
Model	6042
Category	Cordless Telephone
Language	English