www.vtechphones.com
14
Basic operation
Options while on calls
Speakerphone
•
Press to alternate between speakerphone and normal handset use.
Mute
•
Press MUTE/REMOVE on the handset to silence the microphone during a
conversation. You can still hear the caller but the caller cannot hear you.
• The screen displays MUTE.
• Press MUTE/REMOVE again to resume conversation.
Make, answer and end calls
• Press /FLASH or , then use the keypad to dial a number.
-OR-
•
Dial a number (press MUTE/REMOVE to make corrections) and then press
/FLASH or .
• Press /FLASH, or any dialing keys (0-9,
*
or #) to answer an
incoming call.
• Press OFF/CLEAR or put the handset back to the telephone base or
charger to end a call.
• The call timer will be activated during a call to show call duration.
PHoNe 00:00:10
595-9511
MUTE
Press or to
adjust the listening
volume during a
conversation.
•
Call waiting
If you subscribe to call waiting service and you are on a call when a new call
comes in, you will hear a beep. The caller ID information will be displayed
if you subscribe to caller ID service from your local telephone company.
• Press /FLASH on the handset to answer the incoming call and put
the current call on hold.
• Press /FLASH at anytime to alternate between calls.
To Next Page
Loading...
Need help?
General
