www.vtechphones.com
11
Basic operation
Telephone settings
Telephone settings
Edit handset name
• Press MENU/SELECT to display the menu when in idle mode.
• Press or to reach SETUP HS. Press MENU/SELECT.
• Press or to reach HANDSET NAME. Press MENU/SELECT.
Press MUTE/REMOVE to backspace and erase characters.
Press and hold MUTE/REMOVE to delete the entire entry.
Press
*
to alternate between uppercase and lowercase.
• Use the keypad to enter characters (see the chart on page 18.)
• Press MENU/SELECT.
• The screen displays STORED and you’ll hear a conrmation beep.
•
HANdSet NAMe
lANGuAGe
eNter NAMe
HANdSet\
a
Language
To change the language for all screen displays:
• Press MENU/SELECT to display menu when in idle mode.
• Press or to reach SETUP HS. Press MENU/SELECT.
• Press or to reach LANGUAGE. Press MENU/SELECT.
• A checkmark is shown next to the current selection. Press or
to choose the desired language.
• Press MENU/SELECT.
• The screen displays STORED and you’ll hear a conrmation beep.
lANGuAGe
reSet
A handset name
can be up to 14
characters only.
Only handset
display screens
are affected by
the language
setting.
•
•
To Next Page
Loading...
Need help?
General
