VTech 6042 - Reset to Default SettNgs; Temporary Tone Dialing

www.vtechphones.com
13
Basic operation
Telephone settings
Telephone settings
Reset to default settings
The handset and the telephone base can be individually reset to their
default settings by selecting RESET in the SETUP HS or SETUP BS
menus respectively.
• Press MENU/SELECT to display menu when in idle mode.
• Press or to reach SETUP HS or SETUP BS. Press
MENU/SELECT.
• Press or to reach RESET. Press MENU/SELECT.
• The screen displays RESET? Press MENU/SELECT to conrm or
OFF/CLEAR to exit to the previous menu.
• The screen displays STORED and you’ll hear a conrmation beep.
reSet
rING MelodY
reSet?
When default
settings are
reset, all the
previously stored
settings cannot be
retrieved.
When the handset
default settings are
reset, the entire
directory will be
deleted.
When the
telephone base
default settings are
reset, the entire
call log will be
deleted.
•
•
•
Temporary tone dialing
If you have pulse (rotary) service, you can change from pulse to touch
tone dialing during a call by pressing
*
TONE. This is useful if you need
to send touch tone signals for access to telephone banking or long
distance services.
Press /FLASH.
Press
*
TONE. Buttons pressed after this send touch tone signals.
Dial the number.
After hanging up, the telephone automatically returns to pulse dial
service.
•
•
•
•