3.3 Handset LCD Display Icons and Symbols
The LCD display gives you information on the current status of
the telephone.
Steadily on when the handset is in range of the base.
Flash when out of range of the base or not registered to
the base.
Steady when an intercom is in progress.
Flashes when there is an incoming intercom call.
Indicates a call is in progress.
Flashes when a home call is on hold.
Indicates that handsfree is being used.
Indicates that the ringer is switched off.
Steadily on when an alarm is set.
Flashes when the alarm time set before reaches.
Indicates that the keypad is locked.
Indicates when there are received new Voice Message
Waiting (VMWI) not yet read.
Disappears when all the voice messages have been read.
Indicates when the battery is fully charged.
Whole icon ashes when the battery performs initial charging.
Internal block ashes when the battery is in nal charging stage.
To Next Page
Loading...
