VTech ES1610A - Connect the Base Station

4 5
4 5
2.3 Connect the Base Station
Plug the power cable into the base station, plug the other
end of the power adapter into the wall outlet not controlled by
a wall switch.
Plug one end of the telephone line cord into the base station
and the other end into a telephone wall jack. If you have
DSL high speed internet service, a DSL lter (not included)
is required.
NOTEs
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
Ensure power cord is fed through the slot on base so unit sits
ush with the desk.
1.
2.
•
•
•