is an indication given
to you when a new voice mail message is waiting on the network
service provider. This feature is available if you have subscribed
to the voicemail service from you network service provider. You
can press and hold 1 to dial out to the voice mail number directly to
listen to your voice mail messages.
8.1 Access Voice Mail Messages
will display and the VMWI entry is stored in the Call List when
you have new message in your voice mailbox.
Press
MENU
OK
and
p
q
to select CALL LIST.
OR
Press
p
in idle to access the call list.
Press
p
q
to select the desired VMWI entry.
Press to dial out to the voice mail server.
NOTE
If a more recent VMWI entry is received from the same network
server number of an existing VMWI entry, the new VMWI will not
be stored but the date/time of the VMWI will be updated on the
existing VMWI entry. After you have accessed to all new voice
mail messages, VMWI will turn off automatically. When the call list
is full, the new VMWI entry will replace the oldest non-VMWI entry
in the call list.
1.
2.
3.
To Next Page
Loading...
