VTI Instruments EX1629 - Declaration of Conformity

www.vtiinstruments.com
EX1629 Preface 11
D E C L A R A T I O N O F C O N F O R M I T Y
Declaration of Conformity According to ISO/IEC Guide 22 and EN 45014
MANUFACTURER’S NAME VTI Instruments Corporation
MANUFACTURER’S ADDRESS 2031 Main Street
Irvine, California 92614-6509
PRODUCT NAME 48-Channel Strain Gage Instrument
MODEL NUMBER(S) EX1629
PRODUCT OPTIONS All
PRODUCT CONFIGURATIONS All
VTI Instruments Corporation declares that the aforementioned product conforms to the
requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/366/EEC
(inclusive 93/68/EEC) and carries the “CE” mark accordingly. The product has been designed
and manufactured according to the following specifications:
SAFETY IEC 61010-1:2001 (2
nd
Ed.); EN 61010-1:2001 (2
nd
Ed.)
EMC IEC 61326-1:2005 (CISPR 11:1990)
IEC 61326-1:2005 (IEC 61000-4-2:2001)
IEC 61326-1:2005 (IEC 61000-4-3:2006)
IEC 61326-1:2005 (IEC 61000-4-4:2004)
IEC 61326-1:2005 (IEC 61000-4-5:2005)
IEC 61326-1:2005 (IEC 61000-4-6:2006)
IEC 61326-1:2005 (IEC 61000-4-8:2001)
IEC 61326-1:2005 (IEC 61000-4-11:2004)
IEC 61000-3-2:2005
IEC 61000-3-3:2005
CISPR 11 (2004) Class A
ICES-001 (Issue 4)
AS/NZS CISPR 11(2
nd
ED) Class A
FCC Part 15 Subpart B Class A
I hereby declare that the aforementioned product has been designed to be in compliance with the relevant sections
of the specifications listed above as well as complying with all essential requirements of the Low Voltage Directive.
April 2009
Steve Mauga, QA Manager