www.vtiinstruments.com
EX1629 Preparation for Use 41
FIGURE 2-15: TCI/IP SELECTION
d) Click the Use the following IP address radio button.
e) Enter the desired IP address. If using the IP from the example above, 192.168.1.1 can be
used.
f) If not automatically completed after the IP address is entered, set the Subnet mask field
to 255.255.255.0.
FIGURE 2-16: COMPLETED NIC STATIC IP CONFIGURATION
g) Click OK to exit the network configuration properties.
PREVENTIVE MAINTENANCE
Although the EX1629 requries no preventive maintainence, it should be operated in laboratory
environments only. The factory calibration should be performed annually, either by VTI customer
To Next Page
Loading...
