To Next PageTo Next Page
Need help?Do you have a question about the VTI Instruments EX1000A and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Type | Data Acquisition System |
| Slots | 1 |
| Input Type | Analog |
| Voltage Range | ±10 V |
| Resolution | 16-bit |
| Sampling Rate | 100 kS/s |
| Operating Temperature | 0°C to 50°C |
| Current Range | Varies by installed module |
| Interface | Ethernet |
| Storage Temperature | -40°C to 70°C |
| Power Supply | 100-240 VAC |
Covers product certification, warranty terms, limitations, and government rights legend.
Declares product conformity to Low Voltage, EMC, Shock, Vibration, and Ingress Protection standards.
Provides essential safety precautions, terms, symbols, and warnings for product operation.
Lists contact information for customer support, world headquarters, and technical support.
Introduces the EX10xxA product family, their capabilities, and integrated system features.
Details features like combined inputs, self-calibration, scalability, OTD, CJC, and channel independence.
Describes voltage ranges, hardware filters, input connectors, sampling rate, and digital I/O.
Guides on unpacking instruments, selecting installation location, and choosing installation options.
Details software installation, LInC-U utility, network setup, and troubleshooting.
Explains setting instrument time via PTP, SNTP, or manual methods for accurate records.
Explains configuring EU conversions for channels, including voltage and thermocouple types.
Details embedded CJC compensation and association between CJC and input channels.
Introduces the trigger model, events, and configuration for maximizing performance.
Guides on accessing the instrument's embedded web page for control and monitoring.
Outlines the typical steps for programming an acquisition sequence using C functions.
Presents the instrument function set, listing APIs by function and alphabetically with brief descriptions.
Details procedures for factory calibration, including required resources and setup.
Lists necessary equipment and software for performing instrument calibration.
Introduces the EX10SC modular chassis for adding signal conditioning capabilities.
Explains routing EX10SC output signals to EX10xxA input channels via D-sub cable.
Guides on changing 8B modules, including ESD precautions and the process for removal and installation.
Illustrates key components of the analog circuitry, including input options and signal conditioning.
Details input channel conditioning, OTD, IA amplification, and selectable hardware filters.
Explains CJC via precision thermistors, converting resistance to voltage, then temperature.
