VTI Instruments EX1000A - Vtex10 Xxa_Get_Calibration_File

VTI Instruments Corp.
154 EX10xxA/RX1032/EX1044 Function Calls
vtex10xxA_get_calibration_file
FUNCTION PROTOTYPE
ViStatus vtex10xxA_get_calibration_file (ViSession vi, ViInt32 calFileType,ViInt32 buffLength,ViChar
_VI_FAR calibration[]);
FUNCTION PARAMETERS
vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the
session is closed.
calFileType = returns the type of calibration that was performed. Valid return values: 0, 1, or 2.
buffLength = indicates the length of the calibration array.
calibration[] = a string buffer where the calibration file data is returned.
DATA ITEM RESET VALUE
Not applicable to this function.
DESCRIPTION
This function returns the calibration file data associated with the calFileType into a string buffer. The valid return
values for calFileType are:
Decimal
Value
#define Symbol
Description
0
VTEX10XXA_CAL_FILE_FACTORY
Factory calibration
1
VTEX10XXA_CAL_FILE_SELF
Self-calibration
2
VTEX10XXA_CAL_FILE_NON_VOL_SELF
Non-volatile self-calibration
EXAMPLE