VTI Instruments Corp.
54 EX10xxA Preparation for Use
RX10xx Connections
In RX10xx, the channel wiring is via Screw Terminals and is brought out through a cable gland.
Refer to Figure 2-13.
The Power Lines and the other IO Pins are routed through a 13 Pin Circular Connector (P1), refer
to Figure 2-14 and Table 2-4.
FIGURE 2-13: CHANNEL SCREW TERMINAL PLATE SHOWING 32 CHANNELS ON RX10XX
FIGURE 2-14: 15 PIN CIRCULAR CONNECTOR ON RX10XX (P1)
To Next Page
Loading...
