VTI Instruments EX1000A - Vtex10 Xxa_Reset

VTI Instruments Corp.
208 EX10xxA/RX1032/EX1044 Function Calls
vtex10xxA_reset
FUNCTION PROTOTYPE
ViStatus vtex10xxA_reset(ViSession vi);
FUNCTION PARAMETERS
vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the
session is closed.
DATA ITEM RESET VALUE
Not applicable to this function.
DESCRIPTION
This function performs an instrument reset, returning all of the EX10xxA’s acquisition configuration parameters to
their default values.
NOTE An instrument reset clears the FIFO reading memory. All desired acquisition data must be retrieved
from the FIFO prior to the issuance of this function.
EXAMPLE