VTI Instruments EX1000A - Vtex10 Xxa_Set_Alarm

To Next Page

To Previous Page

VTI Instruments Corp.

222 EX10xxA/RX1032/EX1044 Function Calls

vtex10xxA_set_alarm_enable

FUNCTION PROTOTYPE

ViStatus vtex10xxA_set_alarm_enable (ViSession vi,ViBoolean alarm);

FUNCTION PARAMETERS

vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the

session is closed.

alarm = a Boolean value indicating whether an infinite trigger timer is enabled (1) or disabled (0).

DATA ITEM RESET VALUE

alarm = 0

DESCRIPTION

This function enables or disables the use of the LXI alarm. When enabled, the LXI alarm will generate a trigger or

arm event.ENABLES OR DISABLES THE USE OF THE LXI ALARM. WHEN ENABLED, THE LXI ALARM WILL GENERATE A

TRIGGER OR ARM EVENT WHEN IT REACHES THE TIME SPECIFIED BY THE

THIS FUNCTION ENABLES OR DISABLES THE USE OF THE LXI ALARM. WHEN ENABLED, THE LXI ALARM WILL GENERATE

A TRIGGER OR ARM EVENT WHEN IT REACHES THE TIME SPECIFIED BY THE

VTI Instruments EX1000A - Vtex10 Xxa_Set_Alarm_Enable